Remember Me
Trouble logging in?
Please be patient. A whole new experience is on the horizon...
sign in
my journal
members admin +
my account
target accounts
tech view
social view
community +
day plan
Trekkers: 2 | 
Form: Cognitive Trail | 
Phase: Engagement | 
Type: Pre-Event | 
Level: 1 | 
Start: Dec 08, 2019 | 
When:  | 
Duration: 5 Minute(s)
Goal: this task will increase the ability to apply Cal/OSHA safety standards for the construction industry.
create free account
add to my library
add to my day plan
Form: Cognitive Trail | 
Title: Dust, Fumes, Mists, Vapors, and Gases | 
Phase: Engagement | 
Type: Pre-Event | 
Level: 1 | 
Duration: 5 Minute(s)
item element product description amt check
step instructions response
1 The next Steps cover Cal/OSHA safety regulations for Dust, Fumes, Mists, Vapors, and Gases. Where appropriate, we have referenced the code from Title 8 of the California Code of Regulations.

The topics we will cover in this Navitent are:

-Hazard Controls
-Respiratory Protection
-Proper Ventilation
-Common Sources of Hazards

After each of the next Steps, select the 'successful' response to indicate that you have read and understand the Step.

Select 'successful' now and proceed.
2 Hazard Controls

Oxygen deficient atmospheres or harmful dusts, fumes, mists, vapors, or gases in concentrations sufficient to present a hazard to employees must be controlled when possible by removing the employee from the exposure, limiting daily exposure, or applying engineering controls.
3 Respiratory Protection

Whenever the above controls are not practical or fail to achieve full compliance, respiratory protection must be used according to 5144.
4 Proper Ventilation

Ventilation must comply with Article 4 in the General Industry Safety Orders (GISOs) if it is used as an engineering control method.
5 Common Sources of Hazards

-Engine exhaust emission (carbon monoxide, NOx, polycyclic aromatic hydrocarbons, and others)

-Blasting (CO2, NOx, asbestos, silica, dust)

-Concrete and rock cutting (asbestos, silica, dust)

-Fuel storage tanks (harmful vapors)

-Lead abatement (lead particles, lead compounds)

-Asbestos abatement (asbestos fibers)

-Demolition (asbestos, silica, lead, dust, etc.)

-Welding (fumes)

-Painting and spraying (solvent, vapors, lead)

-Sand blasting (asbestos, silica, lead, dust)

-Harmful dust, fumes, mists, vapors, and gases from other sources
6 How much did this Navitent help you to understand the Cal/OSHA safety regulations for Dust, Fumes, Mists, Vapors, and Gases, including:

-Hazard Controls
-Respiratory Protection
-Proper Ventilation
-Common Sources of Hazards

Select your response below.
save and continue
© 2019 Furious Integrated Training Systems, Inc. All rights reserved.