Please be patient. A whole new experience is on the horizon...

Start:Aug 06, 2020

Duration:5 Minute(s)

Goal: this Cognitive Trail will increase the ability to apply Cal/OSHA safety standards for the construction industry.

Description: This Navitent will increase the successfulness of applying OSHA's safety standards. This information was taken from Cal/OSHA Pocket Guide f ... Read More

Summary: Safety Made Simple

Step 1

The next Steps cover Cal/OSHA safety regulations for Hot Pipes and Hot Surfaces. Where appropriate, we have referenced the code from Title 8 of the California Code of Regulations.

The topics we will cover in this Navitent are:

-Covering Pipes
-Checking For Leaks

After each of the next Steps, select the 'successful' response to indicate that you have read and understand the Step.

Select 'successful' now and proceed.

Step 2

Covering Pipes

-Cover all hot pipes and hot surfaces with a thermal insulating material or keep them guarded against contact when they are at 140 ̊F (60 ̊C) or higher and located within:
• 7 feet measured vertically from floor or working level or
• 15 inches measured horizontally from stairways, ramps or fixed ladders. 3308

Note: this order does not apply to operations where the nature of the work or the size of the parts makes guarding or insulating impracticable. 3308

Step 3

Checking For Leaks

Check for leaks from pipelines and ensure the leaks are stopped before working near them. The energy within the piping system must be controlled to prevent an uncontrolled release that could cause injury. 3329

Step 4

How much did this Navitent help you to understand the Cal/OSHA safety regulations for Hot Pipes and Hot Surfaces, including:

-Covering Pipes
-Checking For Leaks

Select your response below.

Elements (0)